BMW R1200RT - Page 155

Remove topcase
Removing rider's seat ( 84).
Remove passenger seat
( 85).
with topcase
OA
Disconnect plug connection 1.
Thread out the connector from
the topcase to the rear.
Open topcase.
If applicable, empty the top-
case and lift out the bottom
mat.
Push slide latch 2 toward the
outside and hold it in this posi-
tion.
Turn rotary fastener 3 in the
direction indicated by the RE-
LEASE arrow.
Release warning 4 is visible.
Close topcase.
Raise the rear of the topcase
and pull it off luggage rack.
Install the passenger seat
( 86).
Installing driver's seat ( 84).
Mounting topcase
Removing rider's seat ( 84).
Remove passenger seat
( 85).
with topcase
OA
If applicable, empty the top-
case and lift out the bottom
mat.
8
153
z Accessories