BMW R1200RT - Page 83

Turn indicators light up once.
Confirmation tone sounds once
(if programmed).
DWA is now switched off.
To deactivate the motion sen-
sor (for example if you are
about to transport the motorcy-
cle on a train and the swaying
movement of the moving train
could trip the alarm), call up
the Settings menu before
switching off the ignition.
Select Vehicle - Alarm
syst. - Sensor.
Select Off (once) to
switch off the motion sensor
this once.
Switch off ignition.
Activation takes 30 seconds to
complete.
Turn indicators are illuminated
three times.
Confirmation tone sounds three
times (if programmed).
DWA is armed, the motion
sensor is deactivated.
Activation without remote
control
with anti-theft alarm system
(DWA)
OE
If necessary, activate automatic
arming of DWA after ignition is
switched off.
DWA Adapting ( 83).
Switch off ignition.
Activation takes 30 seconds to
complete.
Turn indicators are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
DWA is switched on.
Deactivation with remote
control
with anti-theft alarm system
(DWA)
OE
with central locking
OE
Press button 2 on the remote
control once.
4
81
z Operation