The instrument pointers move
once from the beginning to the
end of the scale.
Phase 2
shows red.
Phase 3
General warning light goes out
and display changes to operat-
ing data.
If the 'General' warning lamp
does not show:
Some malfunctions cannot
be indicated if the 'Gener-
al' warning light cannot be dis-
played.
Check that the 'General' warning
light comes on, and that it shows
red and yellow.
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
The self-diagnosis routine checks
whether the BMW Motorrad In-
tegral ABS is ready for opera-
tion. The self-diagnosis routine
launches automatically when you
switch on the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while vehicle is parked.
flashes.
Phase 2
Checking wheel sensors while
starting off.
flashes.
ABS self-diagnosis
completed
ABS warning lamp goes out.
ABS self-diagnosis rou-
tine not completed
ABS is not available because
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation of
the wheel sensors: min 3 mph
(min 5 km/h))
If an ABS error is indicated fol-
lowing completion of the ABS
self-diagnosis routine:
It remains possible to continue
riding. Bear in mind that nei-
ther the ABS function nor the
integral function is available.
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
5
93
z
Riding
To Next Page
Loading...
