Bodyguard T280P - User Identification Feature

10
2.4 User Identification Feature
The User Identification feature allows the treadmill to recognize individuals and automatically enter their weight along with additional
information. The T300 will recognize two and the T280P–T280C will recognize four. The users will have the possibility to view or reset their
own training statistics.
Whenever the User Identification feature is used, the weight will be automatically entered at each exercise program.
Therefore, user weight will not be asked during the program set up. Also, the user’s age will be automatically entered during the Heart Rate
Control program to calculate the maximum heart rate.
The User ID feature gives access to the following options:
• ACTIVATE USER ID
• CREATE USER ID
• VIEW STATISTICS
• EDIT USER ID
• RESET STATISTICS
• DELETE USER ID
Activate User
To activate the User Identification feature:
Enter into the Settings menu, see Section 2.1.
1. Select the USER ID option and press the JustGo
TM
/ENTER key to accept.
2. Select the ACTIVATE USER ID option and press JustGo
TM
/ENTER key to accept.
3. Press INCREASE or DECREASE key to choose ON or OFF to activate or deactivate it and then press the JustGo
TM
/ENTER key
to accept.
Now that the User ID feature is activated; you will be prompted, at the beginning of each program, to select a User
Identification.
Create User
To create a User ID’s:
1. Enter into the Settings menu, see Section 2.1.
2. Select the USER ID option and press the JustGo
TM
/ENTER key to accept.
3. Select the CREATE USER option and press JustGo
TM
/ENTER key to accept.
4. You will immediately be sent to the lowest empty location, if the MEMORY is full you will have to go to the DELETE USER option.
5. A total of six alpha-numeric characters can be used to name the USER ID. Use the INCREASE or DECREASE keys to select any letter from
A to Z or number from 0 to 9 as the first character. If you wish to leave a space between characters, simply
select SPACE (blank character) between the 9 and the A characters. Press the JustGo
TM
/ENTER key to accept this character.
Now the second character must be selected. Repeat this procedure until you have selected a USER ID name.
If you wish to modify a character before all six spaces are accepted, press the CLEAR/STOP key to backspace.
6. Now you have to enter your age. Simply use the QUICK key to select your age. Press the JustGo
TM
/ ENTER key to accept your age.
7. Enter your weight, press the INCREASE or DECREASE key to select your weight and then press the JustGo
TM
/ENTER key to accept it.
8. Then press the CLEAR/STOP key to go back to the USER ID main menu.
Edit User
To edit the different User ID’s:
Select the USER ID option and press the JustGo
TM
/ENTER key to accept.
1. Select the user you want to edit by using the INCREASE or DECREASE key and press the JustGo
TM
/ENTER key to accept it.
2. Enter your weight, press the INCREASE or DECREASE key to select your weight and then press the JustGo
TM
/ENTER key to accept it.
3. Now you have to enter your age. Simply use the INCREASE or DECREASE key to select your age. Press the JustGo
TM
/ENTER key to
accept your age.
4. Press the CLEAR/STOP key to go back to the USER ID main menu.
View Statistics
To view the statistics of a User Identification:
Select the VIEW STATISTICS option and press JustGo
TM
/ENTER key to accept.
Select the User Identification for which you wish to see the statistics. These parameters represent the accumulated values of all the exerci-
ses of a user while the User Identification feature was activated.
• TOTAL DISTANCE displays the distance traveled in miles (or in kilometers depending on your settings).
• TOTAL CALORIES displays the accumulated calories expended.
• TOTAL TIME displays the total exercise time.