7
Overview
This user guide is suitable for the following models: D20H & D20S
Features
• Can be used as Dante AV Encoder or decoder by upgrading firmware
• HDMI2.0 input for using as an encoder, HDMI2.0 and 12G-SDI (D20S) output using as an decoder
• Support up to to 4K@60
• 4K 60 4:4:4 video over standard Gigabit Ethernet
• Ultra-low latency real-time video performance over the network
• 32-bit wide video interface capable of processing code streams 200-800 Mbps
• HDMI 7.1 embedded audio input
• Tunable audio delay to facilitate lip-sync control
• Support unicast and multicast
• Full support of Dante audio and video protocols
• Supported by Dante Controller
• Fully time-aligned routable audio and video streams
• Visually perfect video using network efficient JPEG2000 codec
• Fully validated implementation of HDCP 2.3 encryption
• Complete EDID support
• Firmware updateable over the network
• Works with installed 1Gbps network, no need to replace network infrastructure
• Powered via POE (25W 802.3at PoE+) or DC power (12V 4A) pack
• Compact, surface/rack-mountable design
To Next Page
Loading...