36
Multicast flows are listed in ID order, including the channels contained within the flow.
Note: Unicast flow details are displayed in the Flow Information dialog.
Changing TX channel Names
To change a TX channel name double click on the name and type in a new one. TX channel names must
be unique for the device.
Status Tab
The Status tab is used to obtain current information about a Dante device
Status Tab with Bolin Dante AV encoder
Status Tab with Bolin Dante AV decoder
The tab is divided into sections. The information presented on this tab can be very useful when
investigating networking or clocking issues in the system. The Refresh button can be used to update
this information if required.
Manufacturer Information
To Next Page
Loading...