119
Pull special tool upward to downshift
and push downward to upshift. Place
the gear in the desired position.
1. Use screwdriver as a handgrip
2. Pull to downshift
3. Push to upshift
NOTE: The 2
nd
or 3
rd
gear is recom-
mended.
Remove the special tool. Close the tab
of the tool. Replace tool and screw-
driver in tool box.
Replace seat.
Storage and Preseason
Preparation
Quest MAX and Traxter MAX Series
When a vehicle is not in use for more
than one month, proper storage is a
necessity.
See an authorized Bombardier ATV
dealer for proper procedures.
When using your ATV after storage, a
preparation is required. See an autho-
rized Bombardier ATV dealer for proper
procedures.
V01E05Y
1
2 3
WARNING
Have an authorized Bombardier
ATV dealer inspect fuel system in-
tegrity as specified in MAINTE-
NANCE CHART.
vmo2004_011a.book Page 119 Thursday, May 15, 2003 1:46 PM