SAFETY TRAINING 69
SECTION III – OPERATOR’S GUIDE REVIEW
Objective
The purpose of this section is to:
a) Emphasize the importance of ob-
serving the warning and caution
symbols.
b) Review the Operator’s Guide and be
familiar with the important points of
each section.
Outline
A)Warning and Caution Symbols
– Note the warning and caution sym-
bols in each section and what they
are warning about; know the conse-
quences of not following these
warnings.
B) Operator’s Guide Review
– Note the important points of the
Operator’s Guide:
1. Table of Contents
2. Notice Page
3. Special Safety Messages
4. Operation Warnings
5. Riding Tips
6. Warning Labels
7. Vehicle Identification Number
8. Controls/Instruments/Equipment
9. Break-In Period
10. Pre-Operation Check
11. Operating Instructions
12. Special Procedures
13. Post-Operating Care
14. Cargo and Transportation
15. Maintenance.
Expected Results
Upon completion of this section, you
should:
– Be familiar with the need to review
the Operator’s Guide frequently.
– Know the meaning of the warning
and caution symbols in the Opera-
tor’s Guide and what they refer to.
– Know all sections in the Operator’s
Guide and what they refer to.
vmo2004_011a.book Page 69 Thursday, May 15, 2003 1:46 PM
To Next Page
Loading...
Need help?
General
