Functions and operation
EN
bora.com 19
5.8.10
Settings
Individual settings can be made on the appliance under this menu
item.
Standard code for deactivating guest mode and the child lock:
2021
5.9
Cooldown
The Cooldown function quickly cools the oven chamber with water
and brings it back to the desired target temperature. A Cooldown is
automatically suggested when the temperature in the oven chamber
is higher than the set target temperature. When setting a programme,
you can choose from dry or wet Cooldown options according to the
next cooking step.
5.10
How to use the food
thermometer
u
Take the food thermometer out of the holder.
u
Insert the food thermometer into the thickest part of the food.
T
In the case of food containing bones, insert it right next to the
bone.
T
When cooking whole poultry, insert along the breastbone.
u
When you have finished cooking, clean the food thermometer, put
it back in its holder and wrap the cable around the cable holder.
5.11
Customising the menu
The symbols in the following menus can be rearranged according to
personal requirements:
T
Main menu
T
Automatic
T
First steps
T
Special
T
Maintenance
How to move symbols
u
Press and hold the symbol and drag it to the desired position.
5.12
Updating the appliance
software
Using a USB stick
The latest software is available on the BORA website free of charge
(www.bora.com).
A USB stick with FAT32 formatting is needed to save the
update file.
u
Load the update file onto the USB stick.
u
Touch “Settings” .
u
Perform the update under “System and updates” .
T
After restarting automatically, the appliance will confirm the
update.
Via Wi-Fi
When a new software version is available, the status message
“Update available” appears in the display.
To perform an update via Wi-Fi, the appliance must be
connected to the Internet.
u
Touch the status message “Update available”
or
u
Touch “Settings” .
u
Perform the update under “System and updates” .
T
After restarting automatically, the appliance will confirm the
update.
Call up information about the Wi-Fi update
u
Touch “Settings” .
u
Touch “System and updates” .
u
Touch next to “Latest SW”.
5.13
Activating/deactivating the
demo mode
Activating the demo mode.
u
Touch “Settings”.
u
Touch “System and updates”.
u
Touch “Serial number” five times.
u
Enter the pin “2007” and confirm.
u
Select a demo mode.
u
Activate the demo mode.
Deactivating the demo mode
u
Touch “Demo mode” on the display.
u
Deactivate the demo mode.
u
Enter the pin “2007” and confirm.
Before deactivating demo mode, the fresh water supply must
be connected and the water supply checked.
Deactivating the video sequence
u
Long press on the touch display.
u
Enter the pin “2007” and confirm.
To Next Page
Loading...