bora X BO - Ventilation; Initial Operation; Handover to User

Installation
EN
30 bora.com
9.7 Ventilation
Installation must not take place without return flow apertures
of ≥160 cm² in the plinth area and trim.
u Provide for return flow apertures in the plinth area and in the trim
on the unit.
1
1
Fig.9.16
Ventilation
[1]
Return flow aperture ≥160cm²
9.8
Initial operation
When the appliance is switched on for the first time, the following
settings can be made:
T Select language
T Activate Wi-Fi
T Set date and time (time format)
T Water settings (degree of hardness)
T Select food preferences
The settings can be changed at a later date.
u Insert the drain filter before using for the first time.
u If necessary, update the appliance software.
In rare cases, there may be residues from production in the oven
chamber.
u Clean the oven chamber by hand or using a cleaning programme
without a cleaning cartridge.
When heating up the appliance for the first time, light smoke
and odours may be evident.
9.9
Handover to user
Once installation is complete:
u Explain the main functions to the user.
u Explain all safety-related aspects of operation and handling to the
user.
u Provide the user with the accessories and operating and
installation instructions, which are to be kept in a safe place.