Borri E2001 COMPACT - Page 57

Front panel AC-UPS GD 128x64
OMX76014 Rev. A 39
Alarm
A62
START SEQUENCE BLOCKED
Description
The start sequence was blocked due to an error.
Possible
causes
 Wrong parameters entered during programming.
Solutions
1. Contact our technical support service.
Alarm
A63
EEPROM ERROR
Description The control unit detected an error of the parameters saved in
E
2
PROM.
Possible
causes
 Wrong parameters entered during programming.
Solutions
1. Contact our technical support service.
Alarm
A64
COMMON ALARM
Description
UPS common alarm
Possible
causes
 There is at least one alarm from the UPS logic.
Solutions
1. Check which alarms are present and execute the indicated
procedures.