Bosch AMAX panel 2000 - Domestic Programming; System Report Options Programming; Report Options

AMAX panel 2000 / AMAX panel 2000 EN Programming sheets | en 79
Bosch Sicherheitssysteme GmbH Installation Manual F.01U.241.127 | V4 | 2011.12
Example: For IP Address for receiver 128.73.168.7, communication port 7700, program as:
128 073 168 007 07700
10.1.2 Domestic Programming
10.2 System Report Options Programming
System sends reports to Receiver 1-4 according to system status report options. The
locations for the reports are 137-144.
10.2.1 Report Options
NOTICE!
Programming option anti-replay, acknowledge wait time and pulse interval time are only used
in Bosch network format.
Location 120-135
Default 15(Enter 15 as the first digit is to disable the function) EN=15
Digit Programming Key Digit Programming Key
00 88
11 99
22 *11
33 #12
44 4 Sec Pause13
55 1515
66
77
Location 137-144 Location Default
Zone Restore Report Options (Alarm restore, fault restore,
bypass restore)
137 0
Arm/Disarm report option in AWAY Mode 138 6
Arm/Disarm report option in STAY Mode 139 6
System Status Report Options (Zone fail, comm. fail,
telephone line fail, AC fail, low battery...etc.)
140
6
EN=1/5/
6/7
Keypad panic report 141 0
Keypad fire report 142 0
Keypad medical report 143 0
Test report options 144
6
EN=1/5/
6/7
Zone Status Reporting Options
0 No zone status report allowed
1 Report to Receiver 1
2 Report to Receiver 2
3 Report to Receiver 3
4 Report to Receiver 4