Bosch AMAX panel 2000 Installation Manual

AMAX panel 2000 / AMAX panel 2000 EN Table of Contents | en 5
Bosch Sicherheitssysteme GmbH Installation Manual F.01U.241.127 | V4 | 2011.12
Table of Contents
1 Short Information 10
2System Overview 11
2.1 AMAX panel 2000 / AMAX panel 2000 EN Features 11
3 Installation 12
3.1 Quick start 12
3.1.1 Setting date and time 13
3.1.2 AMAX panel 2000 / AMAX panel 2000 EN Zone Defaults 14
3.2 System Special Status Definition 14
3.3 Programming 14
3.3.1 Programming with the AMAX Keypad 2000 14
3.3.2 Programming with the ICP-EZPK Programming key 16
3.3.3 Installer’s Programming Command 16
3.3.4 Default the control panel with the hardware 16
3.4 Prerequisites for an EN-conform Setup of the System 17
4User Guide 19
4.1 Arming the System 22
4.1.1 Arming in AWAY mode 22
4.1.2 Arming in STAY mode 23
4.1.3 Forced arming 24
4.2 Disarming the System 24
4.2.1 Disarming with CODE 24
4.2.2 Disarming with wireless control Key 24
4.2.3 Disarming with Key switch 24
4.3 Faults or Tamper conditions 24
4.3.1 System fault or tamper analysis Mode 24
4.4 Walk test mode 25
4.5 Event Memory Recall mode 25
4.6 Reset the Control Panel 26
4.7 Bypassing 26
4.7.1 Bypassing Zones 26
4.7.2 Bypassing Faults and Tamper conditions (Except Zone Tampers) 27
4.8 Enable / Disable the installers code 27
4.9 Change individual code 27
4.10 Keypad alarm operation commands 27
4.10.1 Duress alarm 27
4.10.2 Keypad panic alarm 27
4.10.3 Keypad fire alarm 27
4.10.4 Keypad medical alarm 28
4.11 Domestic Dialing 28
4.11.1 Domestic Dialing Alarm 28
4.11.2 Confirming the Domestic call 28

Bosch AMAX panel 2000 Specifications

General

Brand	Bosch
Model	AMAX panel 2000
Category	Security System
Language	English