Bosch AMAX panel 2000 Installation Manual

6 en | Table of Contents AMAX panel 2000 / AMAX panel 2000 EN
F.01U.241.127 | V4 | 2011.12 Installation Manual Bosch Sicherheitssysteme GmbH
5 Fault and Tamper Description 29
5.1 Accessory Modules Fail 30
5.1.1 Keypad 1 fail 30
5.1.2 Keypad 2 fail 31
5.1.3 DX3010 Fail 31
5.1.4 B420/DX4020/ITS-DX4020G Fail 31
5.2 Power Faults 32
5.2.1 AC Failure 32
5.2.2 Battery Failure 32
5.2.3 AUX Power Supply Fail 32
5.2.4 Bosch Option Bus Power Supply Fail 33
5.2.5 RF Power Supply Fail 33
5.3 Warning Device Failure 33
5.3.1 Warning Device 1 Disconnected 33
5.3.2 Warning Device 1 Short 34
5.3.3 Warning Device 2 Disconnected 34
5.3.4 Warning Device 2 Short 34
5.4 Telephone Line Fault 34
5.5 Date and Time Fail 35
5.6 Communication Failure 35
5.6.1 Communication Failure 1 35
5.6.2 Communication Failure 2 35
5.6.3 Communication Failure 3 35
5.6.4 Communication Failure 4 36
5.7 Tamper Condition 36
5.7.1 On Board Tamper 36
5.7.2 Keypad 1 Tamper 36
5.7.3 Keypad 2 Tamper 36
5.7.4 Keypad lock out 37
5.7.5 Sensor Tamper 37
5.7.6 Zone Tamper 37
5.8 External Fault 38
6 System Functions 39
6.1 Duress alarm 39
6.2 Siren Test 40
6.3 Fault and Tamper Analysis Mode 40
6.4 View date and time 40
6.5 Walk Test Mode 40
6.6 Event Memory Recall Mode 41
6.7 Reset panel/clear siren 41
6.8 Initiate a Modem Call 42
6.9 Send Test Report 42
6.10 Bypass Zones 42
6.11 Show Zone Type 42
6.12 Bypass all Faults and Tamper conditions (Except zone Tamper) 43
6.13 Enable Disable installer code user’s access 43
6.14 Change individual code 43
6.15 Setting date and time 43

Bosch AMAX panel 2000 Specifications

General

Brand	Bosch
Model	AMAX panel 2000
Category	Security System
Language	English