Operating
Status Display of the AMC2
The liquid crystal display delivers status information about the
AMC2-4W. Push the 'Dialog' button to switch between different
modes.
Figure 5.1: Location of the ’Dialog’ button
The selected display mode remains set until the next time the
button is pressed. The order of the display pages is shown in
the following table.
Push
Display (Example) Description
0 V01.00 02.03.07
Software versions and date of
the firmware.
1a S/N1: 0910019212 BOSCH serial number
1b S/N2: 00000001
2 02.06 15:35:15 (S) Current date and time
(S) = Summer; (W) = Winter
5
5.1
48 en | Operating
Access Modular
Controller
2016-11 | AMC2-4W | Bosch Sicherheitssysteme
To Next Page
Loading...
