Configuring the Ethernet Interface
To configure the AMC2-4W in a TCP/IP network environment,
use the AmcIpConfig tool provided in the following directory on
the standalone or the remote server of the Building Integration
System:
\\Runtime-drive:\MgtS\AccessEngine\AC\bin
The access control system Access Personal Edition has an entry
of this tool in its program folder:
Start > Programs > Access Personal Edition >
AmcIpConfig
This tool can be copied and used on every computer on the
network.
Notice!
Use only alphanumeric characters plus the seperator "-" (minus/
dash).
Do not use special characters or spaces.
The network name must start with a letter.
The names are not case sensitive.
Notice!
Consult the AmcIpConfig tool’s own online help for details on
configuring the AMC2-4W.
5.2
Access Modular
Controller
Operating | en 51
Bosch Sicherheitssysteme 2016-11 | AMC2-4W |
To Next Page
Loading...
