Bosch AWE - Type Plate; Product Overview; Product Dimensions and Minimum Clearances

Product description
AWE – 6721835317 (2021/09)
6
3.4 Type plate
The data plate of the indoor unit is on the control device behind the
cover. It contains information on the part number and serial number and
also the date of manufacture of the device.
3.5 Product overview
Fig. 3 Components and pipework connections of the indoor unit with
auxiliary heater
[1] Installation circuit board
[2] Resetting the overheating protection
[3] Heating pump (heat transfer medium)
[4] Electrical heater
[5] Automatic air vent valve (VL1)
[6] Cable feed for power input
[7] Cable feed for sensor CAN-BUS and EMS-BUS
[8] Heat transfer medium inlet (primary) from the heat pump
[9] Heat transfer medium outlet (primary) to the heat pump
[10] Flow to heating system
[11] Pressure gauge
[12] Overpressure discharge from the pressure relief valve
[13] Return from the heating system
3.6 Product dimensions and minimum clearances
Mount the indoor unit high enough so that the control unit is easy to use.
In addition, take into account pipes and connections under the indoor
unit.
Fig. 4 Minimum distance (mm)
1
2
3
4
5
10
11
13
12
7
6
98
800
50 50
550