Configuring a RADION keyfob or an Inovonics Transmitter for the
user:
1. Press [Keyfob] to assign a RADION keyfob or an Inovonics
Transmitter to the user.
2. To remove a previously added keyfob or transmitter, press
[Remove].
3. To replace a previously added keyfob or transmitter, press
[Replace] and then [Replace], and follow the next step.
4. On a RADION keyfob, press any button. On an Inovonics
Transmitter, open the transmitter and press the RESET
button, per the manufacturer’s instructions. The keypad
shows Keyfob enrolled.
5. To add a RADION keyfob or an Inovonics Transmitter, press
[Add] to continue, and follow the previous step.
6. To manually enter the RFID, if desired, press [Enter RFID] to
add the RFID. Otherwise, the keypad automatically learns the
RFID into the security system when you add a RADION keyfob
or an Inovonics Transmitter.
7. Press [ENTER] to continue.
8. Enter the RFID.
9. Press [Save] to save the RFID and return to the previous
menu.
Adding or replacing a card for the user:
1. Press [Card].
2. Press [ENTER] to continue.
Control Panels
B94x/B93x Users menu | en 101
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
