Bosch B4512 Owner's Manual

18.2 Date/Time
Your security system must have the correct time and date for
scheduled events to occur at the correct times. Use the Date/
Time function to set both the time and date. The security system
uses a 12-hour AM/PM format.
If your security system is configured for automatic date/time
updates, the update might overwrite your changes.
Setting the date and time:
1. Open the Main menu.
2. Press [Settings] to open the menu.
3. Press [Date/Time] to open the menu.
4. Press [Set Date] to open the menu.
5. Enter your passcode and press [ENTER].
6. Enter the new date in MM/DD/YY format.
7. Press [Save]/[ENTER] to save the change. The keypad shows
Date change complete and then returns to the previous menu.
8. Press [Set Time] to open the menu.
9. Press [Set].
10. Enter the new time in HH:MM format.
11. For B93x, press [AM] or [PM].
12. Press [Save]/[ENTER] to save the change. The keypad shows
Time change complete and then returns to the previous menu.
13. Escape from the menu.
106
en | B94x/B93x Settings menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.

Bosch B4512 Specifications

General

Control Panel Type	Hybrid
Wired Zones	8
Outputs	2
Programmable Outputs	2
Onboard Ethernet	Yes
Cellular Communication	Optional
Series	B Series
Partitions	2
Type	Control Panel
Model	B4512
Manufacturer	Bosch
Input Voltage	16.5 VAC
Communication Formats	Contact ID, SIA
Power Supply	16.5 VAC
Backup Battery	12 V, 7 Ah
Operating Temperature	0°C to +50°C
Weight	1.5 kg
Compatibility	Bosch accessories