Bosch B4512 Owner's Manual

16.3.4 Notification Test
Use this menu to test the security system’s ability to send
personal notification messages to the destination path
designated by your security company.
Testing notifications:
1. Open the Main menu.
2. Press [Actions] to open the menu.
3. Press [Test] to open the menu.
4. Press [Notification Test] to open the menu.
5. The keypad shows the first properly configured notification
path. Use
/[NEXT] to go to the desired notification path,
and then press [ENTER]. The control panel sends a test
notification, and then returns to idle text.
16.4 RPS
Use the RPS menu for connection to Remote Programming
Software (RPS). Your security company uses RPS to configure
and service your security system. RPS is intended for use by
professional or licensed installers only.
16.4.1 Answer
Use the Answer option to answer the phone (pick up the phone
line) to connect to RPS.
Using the Answer menu option to answer an incoming call from
RPS:
Control Panels B94x/B93x Actions menu | en 79
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371

Bosch B4512 Specifications

General

Control Panel Type	Hybrid
Wired Zones	8
Outputs	2
Programmable Outputs	2
Onboard Ethernet	Yes
Cellular Communication	Optional
Series	B Series
Partitions	2
Type	Control Panel
Model	B4512
Manufacturer	Bosch
Input Voltage	16.5 VAC
Communication Formats	Contact ID, SIA
Power Supply	16.5 VAC
Backup Battery	12 V, 7 Ah
Operating Temperature	0°C to +50°C
Weight	1.5 kg
Compatibility	Bosch accessories