20.3 View Log
Use the View Log function to review events stored in your
security system. Reviewing past events might help you identify
problems. Events are stored in the control panel’s memory in
order of occurrence, and tagged with the date and time.
Viewing the log:
1. Open the Main menu.
2. Press [Events] to open the menu.
3. Press [View Log] to open the menu. The keypad shows Enter
Start Date.
To view part of the log, enter the date (MM/DD/YY) at which
you wish to start the review. Press [ENTER].
To view the entire log from the newest event, press [Go to
last event] without entering a start date. The date and time of
the newest event shows. Use
/[PREV] or /[NEXT] to
move through the events.
4. Escape from the menu.
Control Panels B94x/B93x Events menu | en 117
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
