24.4 Extend Closing
Your security company might program your system to expect you
to turn on (arm) within a closing window. A closing window is a
duration of time programmed by your security company. Your
security company sets a fixed length of time for the closing
window. Additionally, your security company might program your
system to automatically turn on (arm) at the end of the window.
Use the Extend Close Time option when you need to stay later
than the scheduled close time. If you do not extend the Close
Time and do not turn the system on before the scheduled time,
the system creates a Late to Close event.
At the beginning of the closing window, the keypad beeps and
shows Please Close Now to remind you to turn on (arm) your
system. It remains in the display until you turn on the system, the
close window ends, or you extend closing. Alarm or trouble
messages replace this message in the event of an alarm or
trouble condition. If the alarm or trouble condition clears before
the end of the close window Please Close Now returns to the
keypad display.
Pressing [ESC] silences the beep and clears the message for 10
minutes. If you have not turned your system on (armed) or
extended closing, the Please Close Now message and beep
Control Panels
B92x/B91x On/Off menu | en 145
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
Need help?
General
