If the gas point is still in alarm (faulted) then the point goes to
trouble after silencing. Some gas points need to be reset. You
cannot clear gas troubles from the display. When gas points
return to normal (trouble conditions are corrected), the security
system automatically clears the fire trouble from the display.
7.4 User and burglary alarms
User alarms have the third priority. User alarms are user initiated
alarms that include hold-up, panic, and medical alarms, for
example. Medical alarms are not available on UL listed systems. A
steady tone sounds for the time set by your security company.
Burglary alarms are the forth priority. When a burglary point
activates while the system is on (armed), the keypad emits a
steady burglary tone.
Ensure that all occupants know the difference between the
steady user or burglary tone, the pulsating gas tone, and the
pulsating fire tone. The tone sounds for the time set by your
security company.
7.4.1 Silence user and burglar alarms
The audible alarm sounds for a specific period of time before it
automatically shuts off. To silence user and burglary alarms
before the time expires, simply enter your personal passcode and
press [ENTER].
Control Panels Alarm events | en 25
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
Need help?
General
