28.2 Date/Time
Your security system must have the correct time and date for
scheduled events to occur at the correct times. Use the Date/
Time function to set both the time and date. The security system
uses a 12-hour AM/PM format.
If your security system is configured for automatic date/time
updates, the update might overwrite your changes.
Setting the date and time:
1. Open the Main menu.
2. Use [NEXT] to go to the Settings menu option, and press
[ENTER], or simply press [5].
3. Use [NEXT] to go to the Date/Time menu option, and press
[ENTER], or simply press [2].
4. Enter your passcode and press [ENTER].
5. Press [1] or [ENTER] to set the control panel’s date.
6. Enter the new date in MM/DD/YY format. If you make a
mistake, the [ESC] key acts as a backspace key. Press [ESC]
to delete the characters and then enter the new numbers.
7. Press [ENTER]. The keypad shows Change complete and then
returns to the previous menu.
8. Use [NEXT] to go to the option to change the time, and press
[ENTER], or simply press [2].
9. Enter the new time in HH:MM format. If you make a mistake,
the [ESC] key acts as a backspace key. Press [ESC] to delete
the characters and then enter the new numbers.
Control Panels
B92x/B91x Settings menu | en 189
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
Need help?
General
