24.5.2 Unbypass
Unbypassing a point returns a bypassed point to the security
system so that it can once again respond to trouble and alarm
conditions.
Unbypassing a point:
1. Open the Main menu.
2. Press [1] or [ENTER] to open the On/Off menu.
3. Use [NEXT] to go to the Bypass menu, and press [ENTER], or
simply press [5].
4. Use [NEXT] to go to the Unbypass menu, and press [ENTER],
or simply press [2].
5. Enter your passcode and press [ENTER].
6. Select a point to bypass.
7. Press [ESC] to exit the menu.
148 en | B92x/B91x On/Off menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.
To Next Page
Loading...
