11. To remove the added keyfob or transmitter, use [NEXT] to go
to the Remove a Keyfob option, and press [ENTER] or simply
press [4].
12. Press [ESC] to exit the menu.
Selecting a keypad display language for the user:
1. Use [NEXT] to go to the Configure Keyfob option, and press
[ENTER], or simply press [4].
2. Press [ENTER] to continue.
3. Press [ENTER] to change the language. The keypad shows
Language configured, and then returns to the previous menu.
This feature is:
available on my system.
unavailable on my system.
Configuring a card to a user:
1. Use [NEXT] to go to the Configure Card option, and press
[ENTER], or simply press [5].
2. Press [ENTER] to continue. The keypad shows Present card.
3. Present the card at the reader.
4. If the reader identifies the card, the keypad shows Card
configured.
5. Press [ESC] to exit the menu.
This feature is:
available on my system.
Control Panels
B92x/B91x Users menu | en 179
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
