Configuring a RADION keyfob or an Inovonics Transmitter for the
user:
1. Press [Keyfob] to assign a RADION keyfob or an Inovonics
Transmitter to the user.
2. To manually enter the RFID, if desired, press [Enter RFID] to
add the RFID. Otherwise, the keypad automatically learns the
RFID into the security system when you add a RADION keyfob
or an Inovonics Transmitter.
3. Press [ENTER] to continue.
4. Enter the RFID.
5. Press [Save] to save the RFID and return to the previous
menu.
6. Press [Add] to add a RADION keyfob or an Inovonics
Transmitter.
7. Press [Add] to continue.
8. On a RADION keyfob, press any button on the keyfob. On an
Inovonics Transmitter, open the transmitter and press the
RESET button, per the manufacturer’s instructions. The
keypad shows Keyfob enrolled.
9. If you need to replace the keyfob or transmitter you just
added (for example, you accidentally added the wrong one),
press [Replace] and then [Replace], and follow the previous
step.
10. You can remove the added keyfob or transmitter by pressing
[Remove].
11. Escape from the menu.
Control Panels
B94x/B93x Users menu | en 97
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
Need help?
General
