Bosch BME280 - Getting Started with BME280 and DD2.1 UI; Setting Up Board-PC Connection

Bosch Sensortec | BME280 User Manual 6 | 23
© Bosch Sensortec GmbH 2023 | All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, Document number: BST-BME280-DSxxx-yy
as well as in the event of applications for industrial property rights
3 Getting Started
The below sections highlight the procedure to set up connections between BME280, DD2.1 UI , and the PC.
3.1 Setting Up the board-PC connection
The procedure to connect sensor to PC via USB is as below:
 Install DD2.1 UI
 Insert the shuttle board and application board.
Figure 1 : Insert sensor for APP2.0
 Connect the board and PC using a USB cable/Bluetooth.
Figure 2 : Insert sensor for APP3.0
Figure 3 : Connect board and PC for APP2.0