Information on the standard functions and the advanced functions
17
Control 8313 – 6720859552 (2017/03)
5.2.2 Manual heating modeand Manual setback mode
Setting the temperature
Temperatures can be set via a round slider or a numeric keypad.
▶ Select the heating circuit in which the temperature is to be changed.
▶ Select Manual operation operating mode.
▶ Tap the temperature symbol ( Fig. 22, [1]).
▶ Tap and hold the circular slider ( Fig. 22, [2]), then drag to the
required temperature.
The temperature is displayed in the circle.
-or-
▶ Tap the temperature display ( Fig. 22, [3]) a numeric keyboard
opens where you can enter the temperature.
Fig. 22 Setting the temperature
[1] Temperature symbol
[2] Circular slider
[3] Temperature indicator
Manual heating mode
In this operating mode, you can set the room temperature via the
symbol.
▶ Tap symbol.
▶ Set the temperature.
Manual setback mode
In this operating mode, you can set the room temperature via the
symbol.
▶ Tap symbol.
▶ Set the temperature.
5.2.3 Manual operation
In this operating mode, you can switch or adjust individual components
manually.
▶ Tap component.
▶ Change values, switch on/off etc.
▶ Tap Save.
5.2.4 Off
In this operating mode, the heating circuit is switched off.
5.3 Advanced functions for heating circuit
To set the advanced functions for the heating circuit:
▶ Select the heating circuit.
▶ Tap symbol and select Auto.
▶ Tap symbol.
The field containing the advanced functions opens.
▶ Change parameter.
To close the display field:
▶ Tap symbol.
Fig. 23 Advanced functions for heating circuit
You can select the duration of the function via the time fields. Once the
time has expired, the system changes over to automatic mode.
To enable the function:
▶ Tap On.
To deactivate the function:
▶ Tap Off.
The selected function starts immediately.
5.4 Holiday function
5.4.1 Setting the holiday function
The selected heating circuit is operated with the preset values while the
holiday function is active. The time program is not taken into account.
You can define the period in which the holiday function is to be active in
a year calendar.
▶ Select the heating circuit.
▶ tap.
▶ Tap On followed by Calendar.
▶ Tap Please enter the first timespan..
▶ Select time spans by tapping on the display fields.
▶ Tap Save.
If more times are required:
▶ Tap +.
▶ Select time spans by tapping on the display fields.
▶ Tap Save.
The holiday function must be set for every heating circuit (DHW heating)
separately.
5.4.2 Deleting the holiday function
▶ Select the holiday period that was entered
▶ Tap symbol.
12:41
50 °
on
o
30
0010016265-001
3 21
12:00
0010009278-001
To Next Page
Loading...
Need help?
General
