Time program
Control 8313 – 6720859552 (2017/03)
22
Creating a circulation program
The circulation program specifies the period in which the DHW
circulation pump is permitted to run. The DHW circulation time
program program is selected and set via the Advanced functions.
Fig. 29 DHW circulation program
[1] Repetitions
[2] Repetitions selection list
[3] Program
[4] Program selection list
[5] DHW temperature
[6] Operating mode
[7] Save
[8] Active time program
[9] Cancel
[10] Switching point
[11] Time
[12] DHW circulation pump time program on
[13] DHW circulation pump time program off
▶ Select Domestic hot water heating circuit.
▶ Tap symbol.
The advanced functions selection box appears.
Fig. 30 Circulation
[1] Start-up frequency
[2] Dedicated time program
[3] Adjustment
[4] Once-only cylinder charging
▶ In the DHW circulation time program field, tap the Auto field.
▶ Tap Program setting field.
▶Set Day of week and Program in the same manner as
DHW circulation time program ( Chapter Creating a new DHW
time program, page 21).
▶ Tap Save.
0010009481-001
12:00
0
00:00 04:00 08:00 12:00 16:00 20:00 24:00
1
1 2 3
6 9
54
13 12 101110
60°C
87
00010009476-001
12:00
2
3
4
1
60°C
To Next Page
Loading...
Need help?
General
