en Display
24
Display Description
Flashes: The voltage control system has paused the pro-
gramme due to impermissible voltage drops or voltage
surges.
→" flashes.", Page48
Note:The programme continues when the voltage is per-
missible again.
The appliance has detected too much foam.
→" ", Page49
¡ Lights up: The door is locked.
– To add laundry, the door can be unlocked.
→"Adding laundry", Page34
– To open the door, you can cancel the programme.
→"Cancelling the washing programme", Page35
¡ Flashes: The door is not closed.
¡ No water pressure.
→"E:30 / -10 and/or ", Page47
¡ The water pressure from the tap is too low.
The detergent drawer has not been pushed in fully.
→" ", Page48
E:35 / -10
1
Error code, error display, signal.
→"Troubleshooting", Page46
1
Example