Cleaning and servicing en
45
3. Ensure that both impellers can
turn.
4. Insert the pump cap.
‒ Ensure that the parts of the
pump cap are correctly as-
sembled.
5. Screw the pump cap as far as it
will go.
The handle on the pump cap must
be in a vertical position.
6. Insert and close the maintenance
flap.
19.4 Cleaning the intake
opening in the rubber
gasket
Regularly check the intake opening
in the rubber gasket for any block-
ages and clean the intake opening.
1. Open the appliance door.
2. Remove any blockages from the
intake opening.
Note:Do not use any sharp or poin-
ted objects.
To Next Page
Loading...
Need help?
General