en HomeConnect
38
facturer on the packaging. Set the
basic dosage amount that corres-
ponds to the dosage recommenda-
tion for 4.5kg of normally soiled
laundry. In doing so, note the water
hardness.
Tip:You can also set the basic
dosage amount in the HomeConnect
app.
1. Press and hold i-DOS 1 for approx.
3 seconds.
a The display shows the set basic
dosage amount.
2. To adjust the setting, press / .
3. Wait briefly to save the setting.
Note:To set the basic dosage
amount for the other dispenser, re-
peat the steps with i-DOS 2.
HomeConnect
17 HomeConnect
HomeConnect
This appliance is network-capable.
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the HomeConnect app, ad-
just its basic settings and monitor its
operating status.
The HomeConnect services are not
available in every country. The avail-
ability of the HomeConnect function
depends on the availability of
HomeConnect services in your coun-
try. You can find information about
this at: www.home-connect.com.
The HomeConnect app guides you
through the entire login process. Fol-
low the instructions in the HomeCon-
nect app to configure the settings.
Tip:Please also follow the instruc-
tions in the HomeConnect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the HomeConnect app.
→"Safety", Page4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
HomeConnect app.
17.1 Setting up the
HomeConnect app
1. Install the HomeConnect app on
your mobile device.
2. Start the HomeConnect app and
set up access for HomeConnect.
The HomeConnect app guides
you through the entire login pro-
cess.
17.2 Setting up HomeCon-
nect
Requirements
¡ The HomeConnectapp has been
installed on your mobile device.
¡ The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
1. Press and hold Remote Start for
approx. 3seconds.
2. Follow the instructions in the
HomeConnect app.
17.3 HomeConnect menu
The HomeConnect menu contains
all of the HomeConnect settings.
Calling up the HomeConnect
menu
▶ Press and hold Remote Start for
at least 3seconds.
a The display shows the first setting
of the HomeConnect menu.
To Next Page
Loading...
Need help?
General