EN | 34
Bosch Security Systems | 2006-05 | V2.0
Dinion IP | Installation Manual
influence the fundamental functioning of the unit (for example firmware updates)
can only be made using the configuration menu.
You can view the current settings by opening one of the configuration pages.
– Click on one of the menu options on the left of the window. The associated
sub-menu is opened.
– Click one of the links in the sub-menu. The corresponding page is opened.
The settings are changed by entering new values or by selecting a pre-defined
value in a list field.
Saving changes
After making changes in a window, click the Set button to send the new settings
to the unit and save them there.
To Next Page
Loading...
