Bosch DIVAR IP all-in-one 6000 User Manual

14 en | Upgrading software DIVAR IP all-in-one 6000
2022-10 | V01 | F.01U.408.604
User manual
Bosch Security Systems B.V.
– In the column Available version, you see the later versions of the installed software
applications. These versions were detected by the system on the Images drive or on a
storage medium.
The column also displays the available versions of the detected software applications that
are not yet installed on your system.
Note: Only later versions of the installed software applications are displayed. The
downgrade of a software application to an earlier version is not supported.
7. In the column Name, click the respective option button to select the software application
that you want to upgrade or to install.
8. In the column Available version, select the desired version to which you want to upgrade
your software application, or which you want to install, and then click Next.
If applicable, a license agreement dialog box is displayed.
9. Read and accept the license agreement, then click Install to continue.
The installation starts and the installation dialog box shows the installation progress. Do
not turn off the system and do not remove the storage media during the installation
process.
10. After all software packages are installed successfully, you will receive the message
Installation finished successfully at the top of the page.
11. If the installation was not successful, you will receive the message Installation failed and
the icon will be displayed. In this case, press F5 to go back to the Software
packages page. Download the respective software packages again and retry.
If the issue persists, contact technical support.

Bosch DIVAR IP all-in-one 6000 Specifications

General

Brand	Bosch
Model	DIVAR IP all-in-one 6000
Category	Network Hardware
Language	English