6 en | Safety DIVAR IP all-in-one 6000
2022-10 | V01 | F.01U.408.604
User manual
Bosch Security Systems B.V.
– For installation and update of software as well as for system recovery, it might be
necessary to use USB devices. Therefore, the USB ports of your system must not be
disabled. However, connecting USB devices to the system poses a risk of malware
infection. To avoid malware attacks, make sure that no infected USB devices are
connected to the system.
1.3 Software precautions
1.3.1 Use latest software
Before operating the device for the first time, make sure that you install the latest applicable
release of your software version. For consistent functionality, compatibility, performance, and
security, regularly update the software throughout the operational life of the device. Follow
the instructions in the product documentation regarding software updates.
The following links provide more information:
– General information: https://www.boschsecurity.com/xc/en/support/product-security/
– Security advisories, that is a list of identified vulnerabilities and proposed solutions:
https://www.boschsecurity.com/xc/en/support/product-security/security-advisories.html
Bosch assumes no liability whatsoever for any damage caused by operating its products with
outdated software components.
You can find the latest software and available upgrade packages in the Bosch Security and
Safety Systems download store under:
https://downloadstore.boschsecurity.com/
1.3.2 OSS information
Bosch uses Open Source Software in the DIVARIPall-in-one products.
You can find the licenses of the used Open Source Software components on the system drive
under:
C:\license txt\
The licenses of Open Source Software components used in any further software installed on
your system, are stored in the installation folder of the respective software, for example
under:
C:\Program Files\Bosch\SysMgmService\apps\sysmgm-
commander\[version]\License
or under:
C:\Program Files\Bosch\SysMgmService\apps\sysmgm-executor\[version]\License