6 720 643 256 (2010/05)
52 | Viewing information US/CA
7 Viewing information
Menu INFO
This menu allows you to view a variety of system
information.
Detailed instructions on navigating through the
menu structure are provided in Section 5.2
starting on page 23.
INFO menu overview
The table below provides
• an overview of the menu structure (column 1).
The menu depth is identified by various
shades of gray.
E.g. the Instruction manual and Boiler menus
are on the same level.
• an overview of the various display options
(column 2).
• descriptions of the individual information
items (column 3).
The menu options are only shown if
the system components are present
and/or active and if no remote
control is accessing these. Some
menu options are not shown
because they are switched off by a
setting for another menu option.
Menu structure INFO Display (example) Description
Boiler – –
Outdoor temperature 50.0 °F (10.0 °C) Current outdoor temperature
Heating mode possible Yes | No Shows whether boiler is ready for operation.
Current heating supply
temperature
131.0 °F (55.0 °C) Current boiler supply temperature.
External supply temperature 131.0 °F (55.0 °C) Supply temperature after the low-loss header.
Burner On | Off Burner status.
Heating pump On | Off Status of pump in the boiler.
Maximum heating supply
temperature
167.0 °F (75.0 °C) Maximum supply temperature set on the boiler.
Maximum DHW temperature 140.0 °F (60.0 °C) Maximum hot water temperature set on the boiler.
Service due Yes | No Shows whether a boiler service/inspection is due.
To Next Page
Loading...
