Bosch FW 200 - Individual Timer Program Settings; Heating Program for Heating Circuit 1 and 2

6 720 643 256 (2010/05)
Individual timer program settings | 99US/CA
13 Individual timer program settings
The default settings and personal settings for the
timer programs are summarized below.
13.1 Heating program for the heating circuit 1 and heating circuit 2
Setting the heating program is described in
section 6.2 on page 39.
Ready-made heating programs (for copying)
P1 P2 P3 P4 P5 P6
AM weekday worker
Monday -
Thursday
06:00am 08:00am 12:00pm 10:00pm – – – –
Friday 06:00am 08:00am 12:00pm 11:30pm – – – –
Saturday 07:00am 11:30pm – – – – – – – –
Sunday 08:00am 10:00pm – – – – – – – –
PM weekday worker
Monday -
Thursday
07:00am 12:00pm 05:00 m 10:00pm – – – –
Friday 07:00am 12:00pm 05:00pm 11:30pm – – – –
Saturday 07:00am 11:30pm – – – – – – – –
Sunday 08:00am 10:00pm – – – – – – – –
All day
Monday -
Thursday
06:00am 08:00am 05:00pm 10:00pm – – – –
Friday 06:00am 08:00am 05:00pm 11:30pm – – – –
Saturday 07:00am 11:30pm – – – – – – – –
Sunday 08:00am 10:00pm – – – – – – – –