Bosch FWA 43 Series - Charging Equipment MWA; Overview Sensor; Connector Pin Assignment

|
20 | FWA 43xx / FWA 44xx | Charging equipment MWA
1 690 326 006 2008-8-25 Robert Bosch GmbH
en
Charging equipment MWA9.
Overview sensor9.1
Overview of different receptacle for the MWA see i
spare parts list.
Mount receptacle MWA longFig. 19:
+ (breadth, length) in direction of front side of the vehicle
Mount receptacle MWA short on left sideFig. 20:
+ (breadth, length) in direction of front side of the vehicle
Mount receptacle MWA short on right sideFig. 21:
+ (breadth, length) in direction of front side of the vehicle
Connector pin assignment9.2
Connector pin assignmentFig. 22:
+ connection for splitter board + 8 V DC (Cable white)
- Connection for splitter board measure (Cable brown)
The charging contact must be mounted only on the i
radio version.
During mounting, the plus pole must always be
!
mounted in the direction front side of the vehicle.
Test after mounting. Wrong wiring leads to short
circuit.
Mount receptacle on the vehicleFig. 23: