Bosch FWA 43 Series - Maintenance Function in the Main Program

1 690 326 006 2008-8-25
| Robert Bosch GmbH
Operating System-Software | FWA 43xx / 44xx | 37 en
Maintenance function in the main 14.5
program
Select the function Maintenance in the program ¶
Version report14.5.1
The version report gives the information about the
i
software status of the individual, installed program
and target data module:
Version report
Version printout
Date: 28.04.2008 14:04:01
Serial number Program Control
Serial number LA0000045
Version Information Measurement System
Product Name CCD 5000 /CCD
Measurement System
(TCP/IP)/1/
File Version 5.0/ 1100
Product Name Demo Application/
Demo
File Version 5.0/ 1100
Version Information Program Control
Product Name Aligner/ALIGNER/1/
File Version 5.0/ 1100
Example Version reportTab. 1:
Equipment status14.5.2
Runtime Tab
The Register Card Runtime gives information about
i
the measuring system event separated for program
runtime:
The protocol helps to quickly find the error cause.
i
There is information as to:
Logging the system configuration
R
Logging the system start R
Information about e.g. non-accessible sensors R
Information about e.g. interrupted working sections R
Logging user actions R
The tab "Runtime" displays the protocol of the i
current program runtime.
The log of the last 10 Program starts is saved under:
i
C:\<program files>\FWA-CCD\WheelAligner\Aligner\
General\Runtime.
Register card General information
The tab "General information" displays the technical
i
data of the connected equipments e.g.,
Connection of the charging station
R
Connection of the sensors R
Software version of the CCD servers R
Supply voltage of the sensor R
The software version of the charging station and the i
sensors is not relevant here.
Abbreviation Legend
OK Everything is in order
S Faulty Camber
U Radiation interrupted
B Battery service
C No data transfer
E EEPROM saving error
R RAM - error
V AD-converter, power supply
X Battery alarm
T Error during self test
Radio Connection via radio
Cable Connection via cable
Abbreviation of the connection analysisTab. 2: