Bosch FWA 43 Series - User Software

1 690 326 006 2008-8-25| Robert Bosch GmbH
en 48 | FWA 43xx / 44xx | Operating System-Software
Step: Recovery of camera data with the Camera 1.
Recovery Tool.
Step: Installing the new firmware with the Flash 2.
Writer.
Reason: Certain areas of the data field (version info)
i
are updated through the firmware update, which are
otherwise overwritten.
User software14.11
Description of the User software14.11.1
Modular structure of individual program modules
Individual program modulesFig. 15:
Main program/user interface14.11.2
Tasks
CCD server = Provision of real-time measured values
R
Demo server (D) = Provision of Demo-measured R
values
Licence server (L)= Provision of licence data
R
ILSV server = Provision of language data R
TDE = Solldateneditor i.e. target data editor R
RemoteControl (IR) = Remote control program R
Function
The main program serves as an interface between the
user and the equipment. The interface provides an
operational platform here.
The main program receives the corresponding data
from 4 servers:
ILSV
R
Licence R
CCD R
Demo R
Path/program file
C:\<program files>\FWA-CCD\WheelAligner\Aligner
R
Aligner.exe R
Program start
Auto Start-Group
R
File description
ALIGNER.exe - Executable program file
R
ALIGNER.ini - Configuration setting R
NIVEAU.ini - Configuration setting Inclination R
measuring device