Bosch FWA 43 Series - CCD Server

1 690 326 006 2008-8-25| Robert Bosch GmbH
en 50 | FWA 43xx / 44xx | Operating System-Software
Many options can be set even via the user interface i
of the CCD server.
It deals with an extraction from the INI - file. The
i
entries can be changed by a service technician.
Configuration settings CCD.INI
[Settings]
Entry Legend
Port=1081 TCP/IP Port number
Tab. 15:
[CCDCalculation] = Calculation of measured values
Entry Legend
WithoutLateralToeRu-
noutPlausibility=5
FSK without longitudinal track
measurement:Permissible deviation
from the max. runout in percentage,
while restoring the start position
WithoutLateral-
ToeRunoutPlausi-
bilityMinLimit=90
FSK without longitudinal track
measurement:Minimum value
of the permissible deviation
UseLensCorrection=1
Correction of the inclined
position of the lenses
0 - do not use
1 - use
Tab. 16:
[CCDCalibration]
Entry Legend
CalibrationPhase
DifferencePlau-
sibility=30
Minimum difference in angle seconds
of the measured values between
the individual adjustment steps.
Tab. 17:
Program functions
Context menu
The operation of the CCD server is carried out via
i
a context menu, which opens in the taskbar with
a right click on the CCD server symbol.
FunctionsFig. 17:
The functions Status, Settings, Channel, Terminal, R
About call a dialogue. These functions can be
accessed even within the opened dialogue.
A running measurement is stopped with
R
StopMeasurement.
Exit stops the CCD server. The main program that is
R
still running cannot work further and must however
be ended.
Status
The status dialogue shows information about
i
TCP/IP-connection to the main program as well
as inquiries to the measuring system, in the tab
"Communication", and displays information on the
connected devices in the tab " Devices ".
Communication:
Communication:Fig. 18:
1 "Conversations" displays the number of clients connected to the
server. "Queries" is the number of queries placed till date.
2 Displays the number of active clients.
3 "Queries" is the total number of inquiries placed to the measuring
system till date, "Failed Queries" is thereby the number of failed
queries.