1 692 106 011 2019-03-26| Robert Bosch GmbH
50 | HTD 6xx / HTD 8xx | en
en – Contents
1. Symbols used 51
1.1 In the documentation 51
1.1.1 Warning notices - Structure and
meaning 51
1.1.2 Symbols in this documentation 51
1.2 On the product 51
2. Safety Instructions 52
2.1 Laser radiation 52
2.2 Risk of asphyxiation 52
3. Calibration device 53
3.1 Visual inspection of beam setter 53
3.2 Checking the laser visor 53
3.3 Preparation 53
3.3.1 Description 53
3.3.2 Calibration device 965 050 102 53
3.3.3 Calibration device 1 692 104 300 54
4. Checking / calibration 55
4.1 Zero point and laser visor – HTD 6xx 55
4.2 Luminous intensity – HTD 6xx 58
4.3 Zero point and laser visor – HTD 8xx 59
4.4 Vertical laser – HTD 8xx 62
4.5 Calibrating the pendulum 64
4.6 Luminous intensity – HTD 8xx 65
4.7 Measuring instrument (height sensor) 68
5. Service setting – HTD 8xx 69
6. Firmware update 73
6.1 HTD 6xx 73
6.2 HTD 8xx 74
7. Height sensor installation 75
7.1 Preparation 75
7.2 Installation 75
8. Mounting vertical alignment lasers 77
8.1 Scope of delivery 77
8.2 Mounting the holder for vertical alignment
laser 77
9. Component replacement 79
9.1 Replacing cable 79
9.2 Opening the light box 83
9.3 Replacing the camera – HTD 8xx 85
9.4 Replacing the lens 85
9.5 Replacing the display unit – HTD 6xx 87
9.6 Replacing the display unit – HTD 8xx 88
9.7 Replacing the test screen – HTD 6xx 89
9.8 Changing the wheels – Device with 4 wheels 91
9.9 Changing the wheels – Device with 3 wheels 92
10. Electrical connections – HTD 6xx 93
11. Electrical connections – HTD 8xx 94
To Next Page
Loading...
