Bosch HTD 6 Series - Zero Point and Laser Visor - HTD 8 Xx

1 692 106 011 2019-03-26| Robert Bosch GmbH
Checking / calibration | HTD 6xx / HTD 8xx | 59 en
4.3 Zero point and laser visor – HTD 8xx
1. Position the calibration triangle with the reference
mark centrally in front of the cross laser.
or
Position the calibration triangle with the reference mark
centrally in front of the calibration device.
2. Position the beam setter behind the vertex of the
triangle.
or