To Next PageTo Next Page
Need help?Do you have a question about the Bosch HTD 8 Series and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | HTD 8 Series |
| Category | Test Equipment |
| Language | English |
Explains warning notices, their structure, meaning, and symbols used in the documentation.
Instructs to observe all warning notices on products and ensure they remain legible.
Warns about the dangers of laser radiation and potential eye injuries.
Details the risk of asphyxiation from vehicle exhaust fumes and necessary precautions.
Defines the intended purpose of the device for checking and setting vehicle headlamps.
Provides information on device packaging and transportation, including stacking limits.
Lists all components included in the packaging of the headlamp tester.
Gives an overview of the headlamp tester's components and functionality.
Provides a summary of the beamsetter's suitability for checking various vehicle headlamps.
Describes the light box, which houses components for headlamp checking and setting.
Details the control panel with touch screen used for operating the beamsetter.
Details the steps for assembling the device components.
Provides step-by-step instructions for assembling the main device components.
Lists essential safety precautions to be followed during device operation.
Instructs on how to fit the battery into the device, including connection and securing.
Defines the pitch angle measurement for headlamps, including parameters and calculation.
Illustrates and explains key measurement quantities for low beam headlamp testing.
Details important measurement quantities for high beam headlamp testing.
Explains fog lamp measurement, noting similarities to low beam testing.
Covers preparing the device and vehicle, including working surface and positioning.
Outlines the necessary steps for preparing the vehicle before headlamp testing.
Details how to position the headlamp tester in front of the headlamp.
Explains aligning the device with the vehicle using the alignment laser.
Describes the procedure for switching on the headlamp tester and its initialisation.
Guides on starting a headlamp test, including entering vehicle details.
Details the procedure for official headlamp testing when the beamsetter is networked.
Explains how to enter vehicle settings for official testing, like headlamp type and inclination.
Provides instructions for testing the low beam headlamp and interpreting results.
Details testing the high beam headlamp and understanding the displayed results.
Guides through testing the fog lamp, checking vertical inclination and luminous intensity.
Describes the final test protocol that appears after testing all headlamps.
Allows users to select specific headlamps and test sequences for individual testing.
Explains how to set vehicle parameters for individual headlamp testing.
Details selecting a headlamp and starting the individual test procedure.
Explains how test results are indicated using coloured dots in headlamp symbols.
Describes how final results of individual testing are presented.
Allows the user to select the display language for the screen text.
Enables setting the display deactivation period for inactivity.
Provides instructions for updating the device firmware using a USB stick.
Displays information about the device, such as brand, model, and serial number.
Allows setting the internal date and time used by the device.
Enables setting a PIN to prevent unauthorized access and improper use.
Provides guidelines for cleaning the device using mild detergents and water.
Details the procedure for replacing the batteries in the alignment laser.
Specifies operating and storage/transportation environmental conditions for the device.
Provides the physical dimensions and weight of the headlamp tester.
Lists the various measuring ranges and parameters the device can handle.
