To Next PageTo Next Page
Need help?Do you have a question about the Bosch HTD 6 Series and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | HTD 6 Series |
| Category | Test Equipment |
| Language | English |
Explains symbols used within the manual's text and their meanings.
Instructions on observing and maintaining legibility of symbols on the device itself.
Details hazards of laser radiation and necessary safety precautions.
Warns about carbon monoxide risks and ventilation requirements.
Defines the specific purpose and limitations of the device.
Provides guidelines for handling and transporting the device safely.
Lists all components included in the packaging with the device.
Overview of the main physical components of the headlight tester.
Details the components within the light box and its functionality.
Explains the operation and symbols of the device's control panel.
Step-by-step instructions for assembling the headlight tester.
Lists essential safety measures for operating and maintaining the device.
Defines and illustrates the measurement of pitch angle for headlamp adjustment.
Explains key measurement quantities for low beam headlamp adjustment.
Explains key measurement quantities for high beam headlamp adjustment.
Describes the measurement process for fog lamps, similar to low beam.
Outlines the necessary steps before operating the device.
Specifies requirements for a suitable working surface for accurate adjustment.
Instructions for ensuring the device is horizontally level.
Steps to prepare the vehicle before headlamp testing.
Instructions on how to correctly position the headlight tester relative to the vehicle.
Steps for aligning the device with the vehicle's headlamps.
Guide on powering on the headlight tester and initial information display.
Procedure for testing individual headlamps according to legal requirements.
Detailed steps for testing low beam headlamps.
Detailed steps for testing high beam headlamps.
Procedure for testing fog lamps.
Program-driven testing for vehicle headlamps, with data transfer.
Accessing and using the device's service menu for settings.
Guidelines for cleaning the device without damaging its components.
Instructions for replacing the batteries in the alignment laser.
Information on proper dismantling and disposal of the HTD 6xx unit.
Specifies operational and storage temperature and humidity ranges.
Provides the physical dimensions and weight of the device.
Details the operational ranges for various alignment and measurement parameters.
