Bosch HTD 6 Series Service Manual

1 692 106 011 2019-03-26| Robert Bosch GmbH
Component replacement | HTD 6xx / HTD 8xx | 91 en
9.8 Changing the wheels – Device with 4
wheels
!
Secure the counterweight with a locking bolt before
tilting the post.
1. Place a sheet of paper or a large cloth on the floor to
avoid damaging the post.
2. Carefully lay the post on the floor.
3. Remove the screw from the wheel.
4. Remove wheel.
5. Attach new wheel.
6. Secure the wheel with the screw.

Bosch HTD 6 Series Specifications

General

Brand	Bosch
Model	HTD 6 Series
Category	Test Equipment
Language	English