1 692 106 011 2019-03-26| Robert Bosch GmbH
76 | HTD 6xx / HTD 8xx | Height sensor installation en
6. Without pulling on it, unplug the connecting cable
from the holder in the light box.
7. Plug the connector into the height sensor.
8. Position the height sensor on the screws and secure
it in place with the two M3 nuts.
9. Attach the light box to the slide shoe.
Fig. 20: Underside of light box
1 Fastening screws
10. Calibrate the height sensor –
See section „4.7 Measuring instrument (height
sensor)“.
To Next Page
Loading...
