Bosch Kiox - 6 Switching on Bluetooth; 8 Adding New Device to Bluetooth; 9 Removing Device from Bluetooth; 10 Setting the Brightness

MY21P01 - 22_1.0_24.09.2020
75
Operation
6.13.14.7 Switching off Bluetooth®
1 Open < Bluetooth®> menu item.
2 Follow the instructions on the on-board
computer.
 Bluetooth® is switched off.
6.13.14.8 Adding new device to Bluetooth®
1 Open < Bluetooth®> menu item.
2 Follow the instructions on the on-board
computer.
 A new device is added.
6.13.14.9 Removing device from Bluetooth®
1 Open < Bluetooth®> menu item.
2 Follow the instructions on the on-board
computer.
 The device is removed.
6.13.14.10 Setting the brightness
1 Open <Sys settings> menu item.
2 Open < Brightness> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The brightness has been set.
6.13.14.11 Setting the clock
1 Open <Sys settings> menu item.
2 Open < Clock> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The time has been set.
6.13.14.12 Setting the date
1 Open <Sys settings> menu item.
2 Open <Date [DD.Mon.YYYY]>.
3 Follow the instructions on the on-board
computer.
 The date is set.
6.13.14.13 Setting the time zone
1 Open <Sys settings> menu item.
2 Open <Time zone> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The time zone is selected.
6.13.14.14 Setting the clock format
1 Open <Sys settings> menu item.
2 Open <24-hour> sub-menu item.
3 Follow the instructions on the on-board
computer.
 Clock displayed in selected 12-hour or 24-hour
format.
6.13.14.15 Selecting the backlight
1 Open <Sys settings> menu item.
2 Open <Light backlight> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The selected black or white on-board computer
design is displayed.
6.13.14.16 Selecting the unit of speed
1 Open <Sys settings> menu item.
2 Open <Imperial.> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The unit of speed is displayed in the selected
km/h or mph format.
6.13.14.17 Select the language
1 Open <Sys settings> menu item.
2 Open < Language.> sub-menu item.
3 Follow the instructions on the on-board
computer.
 The language has been set.
6.13.14.18 Resetting to factory settings
1 Open <Sys settings> menu item.
2 Open <Factory settings> sub-menu item.
3 Follow the instructions on the on-board
computer.
 All settings are re-set to the factory settings. All
user data have been deleted.