Bosch Kiox - Status Bar; Status Screen; Quick Menu; Settings

MY21P01 - 22_1.0_24.09.2020
29
Overview
3.5.2.2 Status bar
Overview of status bar
The battery level indicator (1), the riding light
symbol (2), the indicator for the selected level of
assistance (3) and the clock (4) form the status
bar and are displayed on all screens. If a value is
already displayed on a screen, it is replaced by
another value.
3.5.2.3 Status screen
The current time, the charge level for all the
pedelec’s (e-bike’s) batteries and the charge level
for the smartphone battery, if the smartphone is
connected via Bluetooth®, are displayed on the
status bar on the STATUS SCREEN.
Below, there are icons to display an activated
Bluetooth® function or a device connected via
Bluetooth®, such as a heart rate monitor. The
date of the last synchronisation between the
smartphone and Kiox is also displayed.
3.5.2.4 Quick menu
You can use the QUICK MENU to display
selected settings which can also be adjusted while
you are riding. The following settings can be made
on the quick menu.
3.5.2.5 Settings
All system and service-relevant values can be
read and changed in the settings. The settings
menu structure is customised and may change
when components or services are added.
Table 23: Basic structure of Kiox menu and sub-menu
4
1
2
3
Explanation
<TRIP RESET?> All data are reset to zero for the
trip distance up until this point.
<ESHIFT> The pedalling frequency can be
set.
Menu Submenu
Registration
My eBike
→ <Reset>
→ <Auto reset [Current value]>
→ <Range>
→<eShift>
→ <Wheel circum>
→ <Service: [DD. Mon. YYYY] or after [xxxxx] [km]>
→ <Components>
Bluetooth®
My Profi
Sys settings
→ <Brightness>
→ <Clock>
→ <Date [DD.Mon.YYYY]
→ <Time zone>
→ <24-hour>
→ <Light backlight>
→ <Language>
→ <Factory settings>
Information
→ <Introduction to Kiox>
→ <Registration>◦
→ <FAQs>
→ <Introduction to Kiox>
→ <Certificates>
→ <Licence info>◦
→ <Contact>